Advertisement
4. OPeratiOn
dO nOt touch the vehicle's brake pedal whilst bleeding the brakes.
8
4.1.
Out
4.1.1.
Open the fluid inlet cap. (fig.1)
4.1.2.
Pour in the new fluid. (fig.2)
4.1.3.
Connect the main tube. (fig.3)
4.1.4.
Switch the IN & OUT knob to "OUT"position. (fig.4)
4.1.5.
Switch the lever to "OPEN"position. (fig.5)
4.1.6.
The pressure will be indicate on the pressure gauge (the safety valve will open automatically). (fig.6)
4.1.7.
When the pressure is too high, press the Release Pressure Button. (fig.7)
4.2.
in
4.2.1.
Switch the IN & OUT knob to "IN"position. (fig.8)
4.2.2.
Switch the lever to "OPEN"position. (fig.9)
5. maintenance
Never store the fluid in the container.
8
© Jack Sealey limited
fig.1
fig.4
fig.7
Original Language Version
fig.2
fig.5
fig.8
VS0215 Issue 1 15/11/18
fig.3
fig.6
fig.9
Advertisement
