Global Industrial 246719 User Manual

Global Industrial 246719 User Manual

Patio heater, wall mount, infrared black panel

Advertisement

For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986.

SAFETY INFORMATION

TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, INJURY OR DAMAGE, READ AND FOLLOW ALL
SAFETY PRECAUTIONS, OTHERWISE WARRANTY WILL BE VOIDED.
WARNING: To prevent overheating, keep the air inlets and outlets clean and free of anything that may
cause blockage. Often check all inlets and outlets to ensure they are clear of any dirt or dust
accumulation. DO NOT COVER.
WARNING: Parts of the heater may exceed 390ºF, contact with the heating tube, reflector, or mental
parts near the heating tube, may cause severe BURNS. DO NOT let bare skin touch hot surfaces. Switch
off, unplug and allow the heater to completely cool off before making contact.
WARNING: If provided, use handles when moving this heater. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet from the front of the heater and
keep them away from the sides and rear.
DO NOT insert fingers or objects into any of the openings.
DO NOT use this heater in the immediate surroundings of water (bath, shower, swimming pool, etc.).
DO NOT touch this heater of its controls with wet hands.
Keep all objects a minimum of 3-ft. away from the heater.
DO NOT cover the heater, or put objects such as fabrics or combustible materials in contact with the heater.
DO NOT allow children to play with the appliance. Keep children away unless continuously supervised.
Ensure supply voltage does not exceed 245 volts.
The use of these heaters is forbidden in any area where there is a presence of gases, explosives or
inflammable objects.
Neither the connecting cable nor any other object must come into contact with the heater.
This heater should be switched off at the isolating switch before maintenance or repair work.
Installation and repairs must be carried out by a qualified installer in accordance with current local electrical
regulations.
The heater must not be installed just below an electrical socket-outlet.
Never touch the heater with wet or humid hands or while barefoot.
DO NOT expose to direct rain/snowfall.
The supply circuit must incorporate a double-pole isolating switch having a contact separation of at least
1/8".
DO NOT operate if the power cord or plug is damaged, after a malfunction, or after the unit has been
dropped or damaged in any manner. Disconnect power and have the heater inspected by a reputable
electrician before reusing.
Connect to properly grounded outlets only.
Read this manual thoroughly prior to installation and operation.
Keep these instructions in a safe location for future reference.
Patio Heater, Wall Mount,
Infrared Black Panel
User Manual
Model 246719

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 246719 and is the answer not in the manual?

Questions and answers

Summary of Contents for Global Industrial 246719

  • Page 1 Patio Heater, Wall Mount, Infrared Black Panel User Manual Model 246719 Read this manual thoroughly prior to installation and operation. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986.
  • Page 2 The heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.  NEVER dismantle the components of the heater or replace with components not offered or recommended by Global Industrial. SPECIFICATIONS: Model: 246719...
  • Page 3 Mounting Position The Carbon Infrared Sole Heater must be installed paying special attention to the minimum clearances stated in these instructions. The heater must be mounted on a rigid fixture; ideally on a ceiling directly above the area to be heated. If this is not possible, the heater can be mounted on a wall and angled downwards.
  • Page 4 5. Timer Button: Press to enable timer adjustment; then press “up” or “down” buttons to set the timer from 00 – 24 hours. Note: All 246719 Global Industrial heater remote controls have the same frequency, so it is possible to control several heaters with just...
  • Page 5 In marine or other corrosive environments, gently spray the unit with clean water.  After cleaning, it is advised to warm the heater for 10 to 20 minutes to dry the unit and prevent staining. For additional questions or concerns, contact Global Industrial Customer Service at 1-800-645-2986 or visit www.globalindustrial.com...

Table of Contents