Thames & Kosmos Robotics Smart Machines Track & Treads Experiment Manual page 11

WRITING A PROGRAM
1. Now you are ready to write your first program. Click
the gear button (A) to enter the programming mode.
Choose a blank program (Program 8 starts out
blank).
2. The programming screen appears.
3. Press the plus sign "+" button (B) in one of the
program segments to add a command.
4. The commands menu (C) pops up. You can select
between three types of commands:
• Choose Motors to add motor commands.
• Choose Notes to add sound commands.
• Choose Rest to add a pause command.
Or press the red X button to exit the commands menu.
Continued on next page >>>
Programming the Robots
B
C
A
11