Installation - Klarstein Wonderwall Earth Manual

SCOPE OF DELIVERY
• Heater (1x)
• Fixing holders (2x)
• Screws ST 4*35 mm (8x)
• Plastic fasteners (8x)
• Instruction manual (1x)

INSTALLATION

Unpack your package and find the heater together with the wall mounting accessories
pack. You only need to mount the heater at 4 points. 2 at the top and 2 at the bottom
(on either the left or the right).
1. Take a horizontal line on the wall, take a vertical line to the left of the horizontal line
and intersect the horizontal line.
2. Take any wall hanging bracket and downward, stick the left side of the bracket to
the vertical line and the top to the horizontal line of the top, and mark the position of
the four fixed holes of the wall hanging bracket with marker.
3. Use 8 mm diameter impact drill to punch the four fixed holes of the wall mounting
bracket on the wall and load them into the expansion tube.
4. Fix the closing bracket with 4 ST4*35 mm self-tapping screws. Pay attention to the
mounting hole of the hanging bracket with the thin end facing down.
5. According to the size of the product, take a vertical line to the right of the horizontal
line and intersect with the horizontal line.
6. Stick the right side of the bracket to the vertical line of the right side and the top to
the horizontal line. Mark the four fixed holes of the bracket with a marker.
7. Use 8 mm diameter impact drill to punch the four fixed holes of the wall mounting
bracket on the wall and load them into the expansion tube.
8. Fix the mounting bracket with 4 ST4*35 mm self-tapping screws. Pay attention to
the mounting hole of the mounting bracket with the thin end facing down.
9. Attach the wall screw on the back of the appliance into the mounting hole of the
wall bracket according to the direction of the switch in the upper right corner. The
installation is now completed.
EN
19