Advertisement
Quick Links
Advertisement
Summary of Contents for Da-Lite NET-100
- Page 1 INSTALLATION GUIDE FOR Da-Lite NET-100...
- Page 2 2-pin plug will plug into #10 and #11 and the 3-pin plug will plug into #4, #5 and #6. (See Fig. 1) Figure 1 If you did not order your screen with a built-in SCB-100, remove the 2-pin and 3-pin connectors from the NET-100. Refer to (Fig. 2) DB-25 to RJ-45 Adaptor...
- Page 3 By default the NET-100 is shipped with DHCP the DHCP HostName. For Static IP leave the option "Use the disabled. The following IP address is assigned to the NET-100. following IP configuration" clicked and type in the IP address and Subnet Mask.
- Page 4 To control the screen or lift connected through the SCB-100 to 2. Create a TCP/IP Winsock connection through HyperTerminal the NET-100, you will need to create a TCP/IP Winsock or other emulator program. connection through HyperTerminal or other emulator program.