Download Print this page

TeachLogic Forum 232 Installation Manual page 3

Classroom audio system amplifier / mixer / receiver
Hide thumbs Also See for Forum 232:

Advertisement

Forum
232
Safety Instructions
Read Instructions
All safety and operation instructions should be
read before operating this TeachLogic product.
Retain Instructions
Safety and operating instructions should be
kept for future reference.
Water & Moisture
This product should not be operated near water.
Heat Environment
Do not subject this product to excessive heat
conditions.
Power Source
This product must be connected to an AC power
source per the voltage input specified and
marked on the power supply.
Do not insert any power cable not provided by
the manufacturer into the product. Long prongs
can penetrate inside electrical components or
current charging conductors.
Certifications
TeachLogic systems are manufactured using
lead-free processes and are free of materials
harmful to the environment. They conform to the
most stringent new European guidelines for
consumer products (RoHS).
Introduction
Power Cord Caution
Power cable should be routed clear of
foot traffic and supported clear of kinking
or abrasion.
Object Protection
Locate the operating unit so it will not be
subjected to falling objects or water entry.
Internal Service
User should not attempt to service this product.
All internal service must be accomplished by a
qualified technician.
Electric Shock
Do not adapt or modify the AC power plug. Do
not remove thus lifting the earth ground
connection (3
prong) or use power supply
rd
without a connector to a 3-prong grounded
outlet.
CAUTION
Recycle—Do not dispose rechargeable batteries in
trash. It is unlawful to do so in numerous states. Go
Green. Save our resources and don't contaminate.
Contact: Earth911.com
1-800-CLEANUP
2

Advertisement

loading