Advertisement
RS-232
Forum
232
™
RS-232 feature
The RS-232 feature allows the user to remotely operate the
line level media inputs via a separate wall panel controller.
The RS-232 connector is connected via three wires to the
back panel connector shown to the right.
This allows the receiver/amplifier to be placed in an area or
compartment that is not easily accessed by the user.
Codes that are required for this setup are available on the
teachlogic/com/resources
page under "Application Notes" or
directly at
https://TeachLogic.com/TeachLogic-app-notes-rs-
232-control/.
Audio levels very often need to be adjusted when switching
from computer audio to DVD players and other audio sources.
Such operations as level UP, DOWN and MUTE are easily
accomplished via a typical eight button controller. Shown here
is a Cables To Go controller.
Connecting the control panel:
Connect the control panel wires to the provided 3-pin Phoenix
connector.
Turn RS232 SWITCH to ON position. This will disable the
function of the input volume/gain control knobs on the front of
the amplifier.
11
Advertisement
