Set Up The Poly Medialign 86 System - Plantronics Poly Medialign 65 Installation Manual

Set Up the Poly Medialign 86 System

This section describes how to set up the Poly Medialign 86 system, with a single 86" display.
To set up the Medialign 86 system:
1 Mount the 86" display.
Caution: Three people may be required to lift the display.
a Attach two display brackets to the 86" display using three M8 × 20 mm screws per bracket. Align
the second hole from the top of the brackets with the upper fixing points on the display.
(6) M8 × 20 mm SCREW
b Remove the lower handles from the display. Store them carefully for future use.
Poly, Inc.
86" DISPLAY
SECOND
HOLE
1601-52713-001
Setting Up the Poly Medialign Single Display System
DISPLAY BRACKET
1342-85956-001
53