Power quality measurement unit according to iec61000-4-30 ed. 3 class a (127 pages)
Summary of Contents for IBA ibaBM-FOX-i-3o-D
Page 1
Optical Signal Multiplier Manual Issue 1.0...
Page 2
Required corrections are contained in the following regulations or can be downloaded on the Internet. The current version is available for download on our web site http://www.iba-ag.com. Protection note Windows is a label and registered trademark of the Microsoft Corporation. Other prod- uct and company names mentioned in this manual can be labels or registered trade- marks of the corresponding owners.
Used symbols ....................5 Scope of delivery ....................6 Product properties ....................6 Description ......................6 Functionality ...................... 6 Combination with other iba devices ..............7 System Topologies .................... 8 Programming ....................8 Device views ..................... 9 Status LEDs (L1 to L4) ..................9 Mounting and Dismounting................10...
Manual ibaBM-FOX-i-3o-D About this manual This manual describes the construction, the use and the operation of the device ibaBM-FOX-i-3o-D. Target group This manual addresses in particular the qualified professionals who are familiar with handling electrical and electronic modules as well as communication and measurement technology.
Manual Used symbols If safety instructions or other notes are used in this manual, they mean: The non-observance of this safety information may result in an imminent risk of death or severe injury: • By an electric shock! •...
This results in dramatic cost savings that range from purchasing fewer devices to reduced planning and engineering costs. The ibaBM-FOX-i-3o-D device features one fiber optic input and 3 fiber optic outputs. The input data stream is simply copied to the outputs.
Manual Combination with other iba devices The following devices and boards of the iba product range may be used in combination with ibaBM-FOX-i-3o-D: ibaPADU-8/ -16/ -32 ibaPADU-8-O ibaBM-SLM (SIMOLINK Monitor) ibaBM-DDCS (ABB DDCS Bus) ibaBM-DPM-S/-S-64 (Profibus) ibaBM-CAN ibaPADU-S-IT ibaNet750-BM...
Manual ibaBM-FOX-i-3o-D System Topologies The ibaBM-FOX-i-3o-D provides the ability to multiply fiber optical links. This is possi- ble at each interconnection between iba devices, also between ibaPADU-8 and ibaPADU-8-O devices. Examples: Programming No programming or setting is necessary to operate the device.
Manual Device views 1 Device status indicators (L1 to L4) 2 Main switch ON/OFF (S11) 3 Power supply DC 24 V (X14) 4 FO input RX (X10) 5 FO output TX (X30 to X32) Figure 1: Device view Status LEDs (L1 to L4) The 4 LEDs indicate the device status.
Manual ibaBM-FOX-i-3o-D Mounting and Dismounting Mounting Insert the clip of the mounting rail fastened on the device into the mounting rail. Press the device down in such a way that the clip of the mounting rail engages with a click.
Manual Technical data Main data Short description Name ibaBM-FOX-i-3o-D Description Optical multiplier Order number 13.113501 Connections ibaNet 1 Fiber optic input 3 Fiber optic outputs FO cable 62.5/125 µm FO connectors ST Lean Plug-in connector Length FO line Max. 6562 ft (2000 m) Baudrate 2.0 Mbit/s, 3.3 Mbit/s, 5.0 Mbit/s (only uni-...
Koenigswarterstr. 44 90762 Fuerth Germany Phone: +49 911 97282-0 Fax: +49 911 97282-33 Email: iba@iba-ag.com Contact: Mr. Harald Opel Regional and Worldwide For contact data of your regional iba office or representative please refer to our web site www.iba-ag.com. Issue 1.0...
Need help?
Do you have a question about the ibaBM-FOX-i-3o-D and is the answer not in the manual?
Questions and answers