Use Of Rinse Aid; Loading Cutlery And Dishes - ELEKTRO HELIOS DI8526 User Manual

Table of Contents

Advertisement

Available languages

Available languages

5

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1
3

Loading cutlery and dishes

Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can ab-
sorb water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.
6
2
4
It is normal that water overflows from the salt
container when you fill it with salt.
Make sure that there is no grain of salt outer of
the salt compartment. Salt which stays on the
tank for a while drills the tank. It is recommended to
start a washing programme immediately after you fill
the salt container. This prevents of corrosion because
of spilled salt.
When you set electronically the water softener to lev-
el 1, the salt indicator light does not stay on.
Caution! Do not fill the rinse aid dispenser
with other products (e.g. dishwasher cleaning
agent, liquid detergent). There is a risk of damage
to the appliance.
Adjusting the dosage of rinse aid
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and
pans) with the opening down.
– Make sure that water does not collect in the con-
tainer or in a deep base.
The rinse aid dial is set
at the factory at position
3.
To increase or decrease
the dosage refer to
'What to do if...'
7

Advertisement

Table of Contents
loading

Table of Contents