Related Manuals for Han-Bond HB Series
Summary of Contents for Han-Bond HB Series
- Page 1 Flatbed InkJet Cutting Machine HB-1510P/HB-1512P USER GUIDLINE Please read this manual carefully before using this product and keep it properly.
-
Page 2: Preface
Preface Thank you for choosing HB series Flatbad inkjet cutting machine. Flatbad inkjet cutting machine which is used in clothing, shoes, luggage , handbags, car / aircraft seat, sofa, gasboats, tents, lamps and lanterns industry of plate and the... -
Page 3: Table Of Contents
Preface.............................1 catalog............................. 2 Chapter 1 safety notice......................5 Chapter 2 Brief Instruction....................7 2.1 product application ....................7 2.2 Basic Performance ....................8 2.3 mechanical structure ....................9 2.4 circuit diagram ......................14 2.5 computer and CAD software ................... 15 2.5.1 computer .................... - Page 4 3.6.3 Ink exhaust mark ................... 20 3.6.4 Exchange cartridge ................20 3.6.5 cleaning cartridge ................21 3.7 knife holder ......................23 3.7.1 assemble and disassemble tool holder .......... 23 3.7.2 knife holder structure ............... 23 Chapter 4 print driver......................25 Chapter 5 output center......................
- Page 5 6.3 parameter setting ....................42 Chapter 7 calibration......................44 7.1 offset calibration ..................... 44 7.2 dimensional calibration ................... 46 7.3 pettifoggery coincidence calibration ..............50 Chapter 9 Cleaning and maintenance ................... 54 Chapter 10 failure analysis....................55...
-
Page 6: Chapter 1 Safety Notice
Chapter 1 safety notice Please carefully read all the following instructions before using the flat jet cutting machine: Height of place the flat ink jet cutting cutting machine at work: not more than 1000 meters. Working and storage temperature range of the machine:-15~40 degrees Celsius. - Page 7 When you do not use the machine for a long time, pull the plug from the power outlet And the prohibition of pulling power line, do not use damaged or worn power line, otherwise it may cause electric shock, short circuit or fire.
-
Page 8: Chapter 2 Brief Instruction
Chapter 2 Brief Instruction Special note: all the pictures in this manual are for reference only, except for the special instructions. 2.1 product application Figure 1 blue PVC cutting shoe pattern Fig. 2 non woven reflective film (film) ……... -
Page 9: Basic Performance
2.2 Basic Performance Drive way Project stepping system servo system Inkjet speed 60 ㎡/h 90 ㎡/h Cutting speed 80 cm/s 120 cm/s The max cutting area 1500×1200mm The number of nozzles 2 PCS Ink type HP45 common cartridge Kraft paper, computer paper, red... -
Page 10: Mechanical Structure
2.3 mechanical structure Fig. 3 the overall structure Whole structure name 1 Platform Part 2 Y shaft assembly 3 X shaft assembly... - Page 11 Figure 4 A component name part A name 1 chain supporting the mounting plate 2 X motor assembly 3 cable cover 4 straight guide rail 5 lower sealing plate 6 key film switch 7 key seat 8 electric control assembly body...
- Page 12 Figure 5 part B name part B the name of the tripod body 1 one-way bearing 2 feed paper roller 3 roller seat mounting plate 4 castor 5 back upright column 6 foot stool crossbeam 7 foot stool vertical beam...
- Page 13 Figure 6 part C sketch map part Cname --- cutting part 1 ink rack mounting plate 2 ink rack connecting plate 3 trolley group 4 H5 ink rack 5 Pettifoggery seat 6 rise and fall connecting plate 8 knife holder...
- Page 14 Figure 7 D part schematic diagram part D name - electric control box 1 electric control box 2 main board 3 solid state relay 4 air switch 5 wire slot 8 Y axis stepper drive 9 X axis stepper drive...
-
Page 15: Circuit Diagram
2.4 circuit diagram... -
Page 16: Computer And Cad Software
2.5.1 computer System Microsoft Windows7 Intel Core i5 dicaryon Memory 2G or above Hardpan 500G hard disk CD-ROM 4 speed above CD-ROM 2.5.2 software compatibility HB series of flat jet cutting machine compatible with domestic and foreign arbitrary clothing CAD software. -
Page 17: Chapter 3 Assembly
Chapter 3 assembly 3.1 list Articles in this product packaging box include: Host x 1, column x 4, tripod beam x 2, tripod stringer x 2, and whirlpool air pump x 1, dust absorption hose x 1, iron hoop with hand shank x... -
Page 18: Machine
3.2 machine Install the tripod and connected it with the host (see Figure 3, figure 5). Warm reminder: please scan the following two-dimensional code to watch the installation of video! Download password: 1234 Sweep to watch video installation 3.3 whirlpool air pump Whirlpool air pump installation especially to distinguish between pump "enter mouth"... -
Page 19: Power
3.4 power Flatbad inkjet cutting machine needs to provide AC power 220V/50Hz (some areas using AC 110V/60Hz), voltage fluctuations can not be more than 10%. This power line for this product is our company specially custom-made for Flatbad inkjet cutting machine , without our permission, the use of other power... -
Page 20: Ink Cartridge
3.6 ink cartridge 3.6.1 cartridge type Han-Bond HB Flatbad inkjet cutting machine adopt HP51645 cartridge models, in order to ensure that the print quality, suggest choose genuine cartridges, it’s available in HP consumable stores. Warm tip: when you cut plates of plastic or resin and other plastic materials... -
Page 21: Ink Exhaust Mark
3.6.3 Ink exhaust mark The ink of the cartridge during drawing process, the constant consumption; ink exhaust mark will gradually change from green to black; if the mark is changed to black completely, indicating that the cartridge ink has run out, need to replace the cartridge (see Figure 9). -
Page 22: Cleaning Cartridge
Han-bond ink jet cutting machine can switch into a single jet mode (one cartridge work), that’s through the operation panel set 17 of the [nozzle selection : left / right / all ] options to change into a single injection mode. - Page 23 B Use dry cotton cloth to wipe the ink cartridge side PCB (see Figure 12) to avoid damage to the PCB, should only be wiped once. C Use a clean cloth or cotton cloth dipped in alcohol to clean the nozzle...
-
Page 24: Knife Holder
3.7.2 knife holder structure Warm tip: when you cut plates of plastic or resin and other plastic materials please choose Han-bond company blade,for more information, please contact our customer service staff, the national unified hot line: 400-068-1698! - Page 25 www.han-bond.com...
-
Page 26: Chapter 4 Print Driver
D disk). Make sure the USB data line to be securely connected on the machine, and turn on the power switch of the machine, the computer will be prompted to "update driver software (Han-Bond Printer)", began to enter the installation process. - Page 27 Select "browse the computer to find the driver software (R)" Click “browse"...
- Page 28 Select the "win7 64" folder in the first step copy path, open the "win7 64" folder that under "win7 64" folder , click “OK” after selected. Click "next"...
- Page 29 Load in... Click "close" Installation process complete!
- Page 30 After the successful installation of the Han-Bond Printer driver, turn on the power switch of the machine (the USB data line is in the connected state). Test methods: 'my computer' position with the right mouse button to choose "properties", open the "device manager", in the "universal serial bus controller"...
-
Page 31: Chapter 5 Output Center
Chapter 5 output center Note: when you select output center installation package, Windows XP, win7 32-bit computer operating system choice running the file "Han-Bond print system 32bit"; win7 64 bit or above computer operating system choice running the file "Han- Bond print system 64bit"! 5.1 output center installation (example: win7 64 bit or above computer... - Page 32 Click "next (NEXT)".
- Page 33 Click "next (NEXT)". Click "Install".
- Page 34 Installing...
-
Page 35: The Use Of The Output Center
Install is completed and run Print Center 5.2 the use of the output center Han-Bond print system is a PC terminal software presented by Han-Bond company, its functions include graphics browsing, printing, as well as graphics editing and text notes, etc.. -
Page 36: Graphic Direction Setting
5.2.1 graphic direction setting When the output is installed for the first time and need to set the image direction and open a PLT files (random CD in attached file), In turn by the “ set - Options - automatic rotation 0 degrees” to adjust the parameters, to ensure that the graphics in the right direction. -
Page 37: Language Selection
5.2.4 language selection In the settings window second item can also be carried out setting in English and English. 5.2.5 print segment length settings When chose cutting function, the segment length is set to 1500mm... -
Page 38: Print Preview
5.2.6 Print Preview Open print preview, or click on preview the ready to print graphics. -
Page 39: Print Output
5.2.7 print output Open the print options or click , and enter the required number of print, and then click OK". -
Page 40: File Conversion And Save
5.2.8 file conversion and save Han-Bond print system support Plt. Dwg. Dxf and other types of print file to save as conversion. -
Page 41: Operation Panel Introduction
Chapter 6 Control panel 6.1 operation panel introduction The operation panel is mainly composed by a key film switch and a liquid crystal display device, the control panel is a human-computer interaction platform of vertical ink jet cutting machine.through the liquid crystal display can understand the machine's current state;... - Page 42 【F4】 not enabled 【F5】 not enabled 【F6】 not enabled 【 】 — draw back 【 】 — go forward 【 】 — left shift 【 】 — right shift 【复位/RESET】 — not enabled 【取消/CANCEL】 — Cancel the current print job, in the standby state can enter the test option the current print job.Cancel...
-
Page 43: Parameter Setting
6.3 parameter setting Cutting speed: range（10-120cm） Full cut pressure: range（10-490g） Semi cut pressure: range（10-490g） Half cut command: range (SP0-SP9) Continuous print: OPEN/CLOSED X coincident set: Y coincident set: X axis scaling: 1000mm Y axis scaling: 1000mm Inkjet speed: HIGH/ MEDIUM/LOW... - Page 44 Language: Simplified Chinese / traditional Chinese/English Factory Reset: press【 】for 3 seconds Cut straight line acceleration: range( 5-50) Cut circular arc acceleration: range(5-40)。...
-
Page 45: Chapter 7 Calibration
Chapter 7 calibration 7.1 offset calibration Select the PLT test file "1000X1000.PLT" in the disc and print. Calibration nozzle misalignment Figure 8 jet head dislocation... - Page 46 Calibration of spacing dislocation Figure 9 spacing dislocation Calibrate cartridge tilt misalignment Ink box frame’s tilt lean to the right dislocation (FIG. 10 cases, left), tighten the spring adjusting screw on the left of the ink holder.(Before adjustment, the 2 fixed screws on the right of the ink box rack must be all unscrewed) Ink box frame’s tilt lean to the left dislocation (FIG.
-
Page 47: Dimensional Calibration
7.2 dimensional calibration User can through "Han-bond printing system" or "clothing CAD software” to realizing graphic precision correction. "Clothing CAD software" calibration method please contact the software supplier, following are the correction method of “Han-Bond printing system"! In Han-Bond printing system click "Settings" -->option. "... - Page 48 Enter the design size and the actual size, and click "confirm"...
- Page 49 Han-bond printing system automatically help you calculate the compensation coefficient of “feed direction"...
- Page 50 The setting method of compensation coefficient in the” direction of the car “ is the same as above!!!
-
Page 51: Pettifoggery Coincidence Calibration
7.3 pettifoggery coincidence calibration Shipped along with the machine there is disk, select test file "H8 pettifoggery coincidence set " in the disk and print, Start debugging pettifoggery coincidence. Note: before this operation, the length of the output center is set to 1500 mm... - Page 52 Figure 16 X/Y coincidence effect diagram ("---black line" is ink jet lines, "red line" is cutting line) Note: all of the following parameters must be adjusted during machine in the standby mode or during ink jet period. If it’s in the parameters of the adjustment during the cutting process are not valid.
- Page 53 The second step: take (Figure 16) "B reference position as an example, when the cutting line in the jet line below, it needs to decrease the control panel item 6 [X axis coincidence set] the corresponding value, contrary to increase numerical;...
- Page 54 The third step: take (Figure 17) "C reference position" as an example, when the cutting line in the right-hand of ink jet line, need to increase control panel item 9th [Y-axis scaling] corresponding value, otherwise to decrease the value.
-
Page 55: Chapter 9 Cleaning And Maintenance
Chapter 9 Cleaning and maintenance After using the Flatbad inkjet cutting machine, please keep the machine with dust cover, to prevent dust from entering; Can not use tap water or chemical solvents to clean the surface of the machine, please use a clean cloth to wipe;... -
Page 56: Chapter 10 Failure Analysis
Chapter 10 failure analysis Question 1: turn on the power switch, the machine screen without reaction. Failure analysis and solution: check that the power plug is normal or not, the machine power switch is turned on or not, the power switch is in the "l" position ;... - Page 57 Make sure the cutting material covered the entire table, if the table cannot be covered which will lead to "leak" make the cut object adsorption is not tight; Problem three: after cutting the graph is not normally taken down (not cut completely).
- Page 58 If computer one USB interface is damaged, please replace it to the other USB interface to print; Check the emergency stop switch is locked, clockwise rotation of the emergency stop switch can be unlocked;...