Thank you for purchasing this Xaoc Devices The red stripe indicates the negative –12v rail product. Sarajewo is an analog delay mod- and should point in the same direction on both ule based on old school (but newly manufac- the bus board and the unit.
When the CV inputs are in use, the corresponding knobs act as offsets. The front panel of Sarajewo is shown in fig. 2. The signal you wish to process should be inPut SiGnAl patched to the input jack .
Page 4
front panel overview fig. 2: the interface...
1000 10000 time in Sarajewo is reflected by a change in speed fig. 3: tilt filter response of signal propagation in a fixed delay line, hence it will inevitably cause pitch variation similar to the 1560ms).
Page 6
The fbck slider potentiometer determines how EffEct miXinG much of the delayed signal is returned to the The effect knob in Sarajewo controls the input of the BBD line and mixed with the input wet/dry balance in a distinct manner. In the signal.
Page 7
VS BAndWidth uSAGE tiPS Sarajewo is intended as a long delay effect Just like any other BBD-based effect, Sarajewo achieves long delays by reducing the clock unit, and as such, it excels at longer delay rate, which inevitably limits the usable band- settings.
Need help?
Do you have a question about the SARAJEWO and is the answer not in the manual?
Questions and answers