JVC Boomblaster RV-NB200BT Operating Instructions Manual page 38

Playing a CD or audio file (USB, CD)
On the remote: Use the "SOURCE" button to select the source and press uII button to start the
playback.
On the main device: Use the
start playback
For USB devices or CDs containing audio files (such as MP3), the number of existing folders and files
is displayed as follows:
F--xx t--XXX
The number behind "F" stands for the number of folders and the 2 number block the total no. of tracks.
For audio CDs, information about the number of tracks and total playing time is displayed as follows:
XX
The first number block stands for the number of tracks and the 2 for the total playing time of the CD.
Basic operating functions
Stop playback: Press the
Interrupt the playback: Press the uII button on the device or on the remote control to interrupt the
playback. The signal flashes on the display. Another pressing of the button resumes playback.
Searching for a specific passage during playback: Press and hold the
device or on the remote control more than 2 seconds to activate fast reverse or fast forward. Once
the desired position has been reached, release the corresponding button.
Select a specific track: Press the
playback, pause or stop mode.
Jump every 10 track: Press the
mode.
Select a specific folder (audio files only): Press on the
folder.
Display the ID3 information: Press the "INFO" button on the remote control to display ID3 tags.
14
"
button to select the desired source and press the uII button to
XX:XX
button on the device or on the remote control to stop the playback.
or button on the main devise or on the remote control in
or button on the remote control in play, pause or stop
+10 -10
or on the remote control to select a
Fold+
Fold-
or button on the