Troubleshooting For Remote Wi-Fi Module - Extraflame WIFI MODULE – BLACK LABEL Manual

TROUBLESHOOTING FOR REMOTE WI-FI MODULE

LED STATUS
Off
Power LED
Flashing
(green)
On
Off
Access point LED
(blue)
Flashing
On
Off
Station LED
Flashing
(orange)
On
Off
Flashing
Flashing with
Cloud LED
2 pulses per
(orange)
second
Flashing with
3 pulses per
second
On
OTHER
• The 4 LEDs turn on and off in sequence > The firmware is being updated.
The 4 LEDs light up together for 1 second > The reset has been performed correctly using the relative button.
•
DESCRIPTION
The module is not powered.
The module is starting.
The module has started
successfully.
The module is correctly
connected to a Wi-Fi network
The module is creating a Wi-Fi
network for configuration to
the home Wi-Fi network
The Wi-Fi module is ready to
be configured to a home Wi-Fi
network
The module is not connected to
the home Wi-Fi network
The module is connecting to
the home Wi-Fi network
The module is connected to the
home Wi-Fi network
The module is not connected to
the cloud
The module is connecting to
the cloud
The module is connected
to the cloud but is not
communicating correctly
The module is connected
to the cloud but is not
communicating correctly
The module is connected to the
cloud
ENGLISH
POSSIBLE PROBLEM
ASSOCIATED
The module is not working.
-
-
You want to reconfigure the
module to a Wi-Fi network
-
-
-
If this situation persists for
several minutes, it means that
an incorrect password has been
entered
-
-
If this situation persists for
several minutes, it means
that an incorrect stove serial
number or an incorrect Wi-Fi
module SecureCode has been
entered
An incorrect or unsupported
stove article code has been
entered.
Cloud configuration problem
-
SOLUTION
Connect the supplied external
power supply.
-
-
Press the reset button for at
least 3 seconds and go through
the Total Control 2.0 app
configuration wizard again
-
-
-
Press the reset button for at least
3 seconds and release, and go
through the Total Control 2.0 app
configuration wizard again
-
-
Press the reset button for at least
3 seconds and release, and go
through the Total Control 2.0 app
configuration wizard again
The module will try to update
to the latest software release
via Internet (to update
the compatibility with the
article codes); if the article
code is found, the module is
reconfigured automatically.
If it is not reconfigured after
15 minutes, it means that an
incorrect article code or a code
that is not compatible with your
module has been entered.
Make sure you have chosen
a compatible Wi-Fi module
by consulting https://www.
lanordica-extraflame.com"
Contact after-sales centre
-
25