Table of Contents
Advertisement
2.2.2. Power
The Pocket Pro functions with an internal battery. It can be recharged when by
connecting to a PC (USB cable) or by a (USB – 5VDC) power supply
When not used for 36hours, the Pocket Pro will switch OFF automatically (LCD OFF)
To wake up the Pocket Pro, just press any button
It is also possible to switch OFF manually the Pocket Pro by simultaneously pressing
the
MODE
and
MEMORY
When the Pocket Pro is OFF, all the times are stored in memory
The icon
will indicate the level of the battery
During charge:
Fully charged:
Low level
2.2.3. Time Memory
The Pocket Pro has a memory of 800 stored times
The number of memorized times is shown on the 3 digits (Memory status)
When the memory reaches 90% capacity (720 times), the 3 digits will flash
Warning
Once the memory is full (800 times), the next time recorded will be stored
as 001 automatically overwriting the original time
The memorized time can be recalled and displayed on the LCD at any time (even
during a timing session)
By pressing the
MEMORY
button is held down. The number of the memory shown is displayed on the top-left of
the LCD
Press the
MEMORY
TAGHeuer Timing
buttons for 5 seconds
75% ON / 25% OFF blinking
with USB Cable: icon ON
Without USB cable: icon OFF
(<10% charge): blinking 50% ON & 50% OFF
(you still have 2-3 days autonomy)
button, the memorized time 001 will be displayed as the
button again and the next stored time will be displayed
Page 5 / 20
Advertisement
Table of Contents
