The Upper Basket; Adjusting The Height Of The Upper Basket - Zanussi ZDT 6041 Instruction Book

The cutlery basket is in two parts which can be separated to
give greater loading flexibility. To separate the two parts, slide
them horizontally in opposite
directions and pull them
apart. To reassemble,
reverse the procedure.

The upper basket

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
Before closing the door, ensure that the spray arms can
rotate freely.
UI62
US64
US71

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
With upper basket raised
With upper basket lowered
To move to the higher position proceed as
follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the stops
(A) in their original position.
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
After loading your machine always close the door, as an
open door can be a hazard.
8
Maximum height of the dishes in
upper basket lower basket
20 cm 31 cm
24 cm 27 cm
RC01