Table of Contents
Advertisement
Quick Links
AEOLUS-SENSE PRO
INSTALLATION MANUAL
NOTE: Products AEOLUS-SENSE PRO are collectively referred in the current document as
AEOLUS-SENSE PRO. If explicit reference to one of the products is needed, this is made by the
actual product name.
ATTENTION: Installation of the AEOLUS-SENSE PRO is supplemental only. It is not intended
as a replacement for or modification to an existing, approved, or required system.
AEOLUS-SENSE PRO is not a certified aviation instrument. Do not rely on AEOLUS-SENSE
PRO as your only navigation aid. Failure to comply to this warning may result in property
damage, serious injury or death. You assume total responsibility and risk associated with
using this device and associated app.
Congratulations on purchasing an AEOLUS-SENSE PRO. This device provides rich flight
information as detailed below. Proper installation and maintenance of the devise facilitates
accurate performance and uninterrupted operation.
Please read the current manual prior to using AEOLUS-SENSE PRO and keep it for future
reference.
Correct operation of the AEOLUS-SENSE PRO requires that one or more mobile smart device(s)
(iOS or Android) are connected to the device.
ΑTTENTION
We update the application EFIS TA and the firmware of our units when necessary to ensure the
best performance of our devices. This procedure is automatic. When you connect your mobile
device to the internet, an update is automatically downloaded. If you are asked to give your
consent, do so. After downloading the update, the first time you connect the tablet to one of our
devices, you'll be asked to confirm the firmware update. Press confirm.
ATTENTION, during this process, don't power off the device for 3mins. Then reconnect it to the
tablet for normal operation. Please ensure that the power supply is enough for the time required
for the update operation.
If the device is turned off intentionally or because of poor power supply during this operation, the
device could stop working and the only way to recover it is by sending back to the factory for
complete reprogramming.
1
Advertisement
Table of Contents
Related Manuals for TALOS AEOLUS-SENSE PRO
Summary of Contents for TALOS AEOLUS-SENSE PRO
- Page 1 INSTALLATION MANUAL NOTE: Products AEOLUS-SENSE PRO are collectively referred in the current document as AEOLUS-SENSE PRO. If explicit reference to one of the products is needed, this is made by the actual product name. ATTENTION: Installation of the AEOLUS-SENSE PRO is supplemental only. It is not intended as a replacement for or modification to an existing, approved, or required system.
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1 AEOLUS-SENSE PRO ............................. 3 1.1 Mounting the AEOLUS-SENSE PRO ....................... 3 1.2 Power Connection ............................4 1.3 Software – EFIS TA app ..........................5 1.4 Compass Calibration ............................7 1.5 AHRS Leveling ..............................8 1.6 Other Considerations Regarding the AEOLUS-SENSE 4(T) ADS-B ............ -
Page 3: Aeolus-Sense Pro
1 AEOLUS-SENSE PRO The AEOLUS-SENSE PRO is shown in Fig. 1. It is a portable device that comes together with a GPS antenna and an ADS-B antenna, and optionally with a USB adaptor for cable connection to a smart mobile device (tablet or smartphone). AEOLUS-SENSE PRO includes a dual-band (978 MHz and 1090 MHz) ADS-B receiver for traffic and weather information. -
Page 4: Power Connection
It is important for the AEOLUS-SENSE PRO to be mounted parallel and as close as possible to the symmetry axes of the airplane (see Fig. 2). The front side of the AEOLUS-SENSE PRO is marked by a small airplane on the cover of the unit. After mounting the AEOLUS-SENSE PRO, the “AHRS leveling”... -
Page 5: Software - Efis Ta App
The red cable connects to the positive pole (+) The black cable connects to the negative pole (-) It is suggested that AEOLUS-SENSE PRO is always connected to a power source, and is operated with the battery-switch on. In case of power-failure, AEOLUS-SENSE PRO will continue its operation after a short reboot (please make sure you reconnect to the AEOLUS-SENSE PRO WiFi network). - Page 6 PRO, and the above message disappears. If, for any reason, connection to the AEOLUS-SENSE PRO is lost (e.g. AEOLUS-SENSE PRO is turned off due to: power failure & battery-switch in off position), EFIS TA app switches automatically to standalone mode and the message reappears.
-
Page 7: Compass Calibration
Before start using your AEOLUS-SENSE PRO, the device’s compass should be calibrated. This only needs to be done once. For that, the AEOLUS-SENSE PRO has to be powered up and the EFIS TA app must be running on a connected (see above) smart mobile device. Please note that compass calibration must be performed with the aircraft in a parking position on the ground, and never during a flight. -
Page 8: Ahrs Leveling
“Good” or “Strong” indication. (c) Indication as “Strong” calibration signifies that the device’s compass has been properly calibrated. Fig. 5: To easily calibrate the Compass start by slowly rotating AEOLUS-SENSE PRO three times around each axis and then perform a sequence of “lazy eight” maneuvers until you have a “Good”... -
Page 9: Other Considerations Regarding The Aeolus-Sense 4(T) Ads-B
• Power up your device. • Connect your smart mobile device (iOS or Android) to the AEOLUS-SENSE PRO wifi Network. • Start the EFIS TA app on your mobile device. -
Page 10: Aeolus-Sense Pro Maintenance
AEOLUS-SENSE PRO. This means that the AEOLUS-SENSE PRO will recover in any flight attitude, such as sharp turns, strong turbulence, etc. No constraint is imposed of straight and leveled flight for recovery, which sometimes, in IMC is impossible to know. - Page 11 For support via email, please contact: support@talosavionics.com For voice support, please call: USA: +1-309-874 4227 Europe: +30 2815 304480 For general questions & feedback, please contact: info@talosavionics.com...