Bradley S19-435EFW Installation

Angled hand-held eye/face body wash drench hose with hose holder

Advertisement

Quick Links

215-1182 Rev. K; ECM 09-05-0028
© 2010 Bradley Corporation
Page 1 of 3
3/1/10
Installation
S19-435EFW
Angled Hand-Held Eye/Face
Body Wash Drench Hose with
Hose Holder
Table of Contents
Pre-Installation Information . . . . . . . . . . . . . . . . . . . 2
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . 2
Components And Parts List . . . . . . . . . . . . . . . . . . . 3
P.O. Box 309, Menomonee Falls, WI USA 53052-0309
PHONE 800.BRADLEY (800.272.3539) FAX 262.251 5817
bradleycorp.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S19-435EFW and is the answer not in the manual?

Questions and answers

Summary of Contents for Bradley S19-435EFW

  • Page 1 Components and Parts List ....3 215-1182 Rev. K; ECM 09-05-0028 P.O. Box 309, Menomonee Falls, WI USA 53052-0309 © 2010 Bradley Corporation PHONE 800.BRADLEY (800.272.3539) FAX 262.251 5817 bradleycorp.com Page 1 of 3 3/1/10...
  • Page 2 1. Connect the end of the drench hose to the ½" NPT water supply. 2. Mount the safety sign to the wall using the sign-mounting hardware (supplied by installer). 3. Open the water supply line. Test for leaks and adequate water flow. 3/1/10 Bradley Corporation • 215-1182 Rev. K; ECM 09-05-0028...
  • Page 3 Safety Sign Hose Holder Installation Wall Mounting NOTE: Install the unit so that the top of the sprayhead is 33"–45" (838mm–1142mm) from the finished floor. Screws and anchors supplied by installer. Bradley Corporation • 215-1182 Rev. K; ECM 09-05-0028 3/1/10...

Table of Contents