Tempo Communications FCL100 Instruction Manual

Read and understand all of the instructions
and safety information in this manual
before operating or servicing this tool.
Register this product at www.TempoCom.com
This symbol is used to call your attention to hazards or unsafe practices which could
result in an injury or property damage. The signal word, defined below, indicates the sever-
ity of the hazard. The message after the signal word provides information for preventing
or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result in severe injury or death.
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage.
Read and understand all of the instructions and safety information in this
manual before operating or servicing this tool.
Failure to observe this warning could result in severe injury or death.
Electric shock hazard:
• Do not operate in an explosive atmosphere such as in the presence of flammable
gases or fumes.
• Before applying power, verify that the unit is set to match the available line voltage.
Failure to observe these warnings could result in severe injury or death.
55500187 REV0
INSTRUCTION MANUAL
SAFETY
ALERT
SYMBOL
© 2020 Tempo Communications Inc.
FCL100
Field Fiber
Optic Cleaver

Description

The Field Fiber Optic Cleaver, FCL100
cleaves fiber optic cables for use with
mechanical connectors and Bare Fiber
Adapters. It can also be used with
fusion splicers on a limited basis.

Specifications:

• 125 micron fiber
• 2.0mm to 20.0mm cleave
lengths
• Size: 4.88" x 0.79" x 1.57"
(124mm x 20mm x 40mm)
• Weight: 0.13lbs (60g)
• Spring activated
02/20