Advertisement
Available languages
Available languages
Operating instructions
Car smartphone holder for air vents
(BT-SPH-KFZ100)
Item no. 1575758
Intended use
This car smartphone holder is designed to secure mobile devices with a width of
55–90 mm. It attaches to the air vents on a vehicle dashboard.
The product is intended for use inside vehicles. Do not use it outdoors. Contact with
moisture (e.g. in bathrooms) must be avoided under all circumstances.
For safety reasons, you must not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition,
improper use may cause a fire or other hazards. Read the instructions carefully and
store them in a safe place. Make this product available to third parties only together
with its operating instructions.
This product complies with statutory national and European regulations. All company
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Car smartphone holder
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating
instructions. Always read this information carefully.
This symbol indicates special information and advice on how to use the
product.
Safety information
Read the operating instructions and safety information carefully. If
you do not follow the safety instructions and information on proper
handling in this manual, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and
prevent unauthorized use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a
low height may damage the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or
an authorized repair centre.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Product overview
1 Movable clamp
1
2 Clip
3 Fixed clamp
2
3
Installing the car smartphone holder
When choosing the mounting surface, ensure that you will have a clear
view of the road and will not be distracted when driving. Always comply with
all laws governing the use of mobile phones in cars.
• Select a suitable air vent for securing the smartphone
holder to your vehicle. Choose the correct size option
for your air vent:
- A - Narrow vent
- B - Wide vent
• Rotate the clip (2) to the desired position (the clip will
click into place in each position).
Inserting a mobile phone
• Pull the movable clamp (1). Place your smartphone into the
holder in the desired orientation and let go of the clamp to fix
your phone in place.
• To remove your phone, follow the above steps in the reverse
order.
• To remove the holder, start by removing your mobile phone.
• After removing your phone, carefully move the holder left
and right to release it from the air vent.
• Caution! When removing the holder, exercise caution to
avoid breaking the clip (2) or the slots on the air vents.
Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical
solutions, as these could damage the housing or stop the product from
functioning properly.
Use a dry, lint-free cloth to clean the product.
Disposal
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Suitable for mobile
devices with a width of ................................55–90 mm
Max. load capacity ......................................2.5 kg
Operating conditions ................................... -10 to +80 °C, 10–85 % relative humidity
Storage conditions ...................................... -20 to +80 °C, 10–95 % relative humidity
Dimensions (H x W x D) .............................98 x 29 x 25 cm
Weight ........................................................Approx. 33 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the
capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also
in part, is prohibited. This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
• Insert the clip into the air vent until the holder
is securely in place (refer to the left-hand
diagram for the correct orientation).
• If necessary, turn the smartphone holder to
adjust it to the desired position (portrait or
landscape orientation).
(non-condensing)
(non-condensing)
*1575758_v1_0717_02_DS_m_4L_(1)
Advertisement
