Replacing The Lamp; Technical Data - Zanussi ZBB27450SV User Manual

Problem
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.

REPLACING THE LAMP

The appliance is equipped with a long-
life LED interior light.
It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
CAUTION! Disconnect the plug from
the mains socket.
1. With your fingers, spread slightly both sides of
the transparent cover to unhook them and
detach the cover pulling it in the direction of
the arrows.

TECHNICAL DATA

TECHNICAL DATA
Dimensions of the recess
12
Possible cause
The door has been opened
often.
There is no cold air circula-
tion in the appliance.
1
2
1
Open the door only if necessary.
Make sure that there is cold air
circulation in the appliance.
2. Replace the lamp with the one that has
identical characteristics and is specifically
designed for household appliances.
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.
Make sure that the light switches on.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
Height
Width
Solution
1780 mm
560 mm