Advertisement
Available languages
Available languages
MG10CF
CHANNEL
CLEAN
OVERDRIVE
VOLUME
GAIN
VOLUME
CONTOUR
INPUT
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
1
2
3
4
5
6
MG15CF & MG15CFR
CHANNEL
CLEAN
OVERDRIVE
VOLUME
GAIN
VOLUME
INPUT
0
0
10
10
0
0
10
10
0
0
10
10
1
2
3
4
5
1. Input Jack Socket
Jack input for your guitar. Use a good quality guitar
cable (i.e. one that's screened/shielded) to help
prevent noise, interference and unwanted feedback.
2. Volume Control - Clean Channel
This control adjusts the volume of the Clean Channel.
3. Channel Switch
This switch allows you to change between the amp's
two channels, Clean and Overdrive, via the front
panel. When the LED is green, the Clean channel is
engaged. When the LED is red, the Overdrive channel
is engaged.
4. Gain Control - Overdrive Channel
This control sets the operating level of the pre-amp.
Simply turn up the Gain control until the required
amount of distortion is achieved.
5. Volume Control - Overdrive Channel
This control adjusts the volume of the Overdrive
channel. The louder this channel is set, the 'looser' the
amplifier will sound and feel.
6. Contour Control (MG10CF only)
This highly effective tone control works by modifying
the mid-range (body). The tone can range from
traditional and woody sounding (setting at 10), to
balls-to-the-wall (setting at midway), to aggressive,
'scooped' and modern (setting at 0)... and all points
in-between.
7. Bass Control (MG15CF & MG15CFR only)
Turning the Bass control will effect the amount of
low frequencies or bottom end in your guitar tone.
Rotating this clockwise will increase the amount of
lower tones creating deeper and thicker sounds.
Turning this control anti-clockwise will decrease the
bass frequencies in your tone reducing any bottom
end thud.
8. Middle Control (MG15 & MG15R only)
Adjusting the middle frequencies will vary the amount
of body to your sound. Attenuating (decreasing)
Technical Specification
MG10CF MG15CF MG15CFR
MG10CF
Power (RMS) 10W
15W
C hannels
2
Speaker
1x6½"
1x8"
Weight (kg)
4.8
7.4
Size (mm)
POWER
W
296
382
H
314
379
11
12
13
D
175
205
MG15CFR
BASS
MIDDLE
TREBLE
REVERB
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
7
8
9
10
11
12
the middle by turning this control anticlockwise will
yield a more hollow sound with the bass and treble
frequencies appearing to be more accentuated.
Conversely, increasing the middle will add body to the
sound.
9. Treble Control (MG15CF & MG15CFR only)
By adjusting the Treble control you can add or take
away the higher frequencies in your guitar tone. By
increasing the amount of treble you will make your
tone brighter, ideal for more percussive playing styles.
10. Reverb Control (MG15CFR only)
This control lets you add a lush reverb to the selected
channel, from a subtle hint to cavernous and all points
in-between.
11. MP3 Line In Socket
If you want to jam to your favourite MP3, CD or tape
track, connect the line out or headphone output of
your player here, adjust the volume of your player to
match that of your guitar and you've got the perfect
'play-along' practice system.
12. Headphone Socket
For use when silent practice is the order of the day.
Connection of headphones will automatically mute
the internal speaker.
13. Power Switch
The power switch turns your amplifier on and off. The
Channel switch will light up when your amplifier is turned
on and will not be lit when the amplifier is switched off.
Note: The specific mains input voltage rating that your
amplifier has been built for is shown on the back panel.
Before connecting to the mains electricity supply,
always ensure that your amplifier is compatible with
your electricity supply. If you have any doubt, please
get advice from a qualified technician. Your Marshall
dealer will help you in this respect.
Please ensure the amplifier is switched off and
unplugged from the mains electricity supply before
being moved.
1
15W
2
2
1x8"
7.4
382
379
205
POWER
13
Advertisement
