Aftercare - Bowers & Wilkins CT800 Series Installation Manual

Aftercare

The speaker cabinet surfaces and the casing of the CT8 XO usually only require dusting. If you wish to use an
aerosol cleaner, remove any speaker grilles first by gripping round the edges and gently pulling them away from the
cabinet. Spray onto the cleaning cloth, not directly onto the cabinet. The grille fabric may be cleaned with a normal
clothes brush whilst the grille is detached from the cabinet.
When replacing grilles, ensure that the pegs are correctly aligned with the receptacles in the cabinet before pushing
into place.
Avoid touching the drive unit diaphragms, especially the tweeter, as damage may result.
27