Yardian YDN1602 User Manual page 24

Step 5.
24
Please stay close
doing "Wi-Fi onboarding".
Check Yardian's LED status. Yardian should
be in Wi-Fi AP mode to proceed (LED blinking
green and blue).
to the Yardian device when
Press
If Yardian is not blinking green and
blue, please press and hold the
Wi-Fi reset button for around 5
seconds and release when you see
the LED blinking green and blue.
LED in purple!
If your Yardian is in Wi-Fi AP mode
for more than 15 minutes, you will
be asked to reboot Yardian (Press
Wi-Fi reset button until LED turns
red).