Plasma Torch - Ramsond CT Series Instruction Manual

R
amsond
Instruction Manual for CT 416 and 518 D & DX Series
1. TORCH BODY (CUT TORCH IS ALSO EQUIPPED WITH A HAND SWITCH)
2. REVERSIBLE ELECTRODE
3. SWIRL RING
4. TIP
5. CUP
Before replacing the consumables of the torch make sure the machine is turned off and disconnected from the power
source.
CONSUMABLES ARE AVAILABLE FOR PURCHASE AT www.RAMSOND.com.
© Copyright RAMSOND Corporation 2007 – All rights protected. Unauthorized reproduction, in part or whole prohibited.
®

PLASMA TORCH

WARNING
Page 15