Advertisement
Parts needed for this step:
1 Left rear baffle
3 Button Head Socket Bolts, 5/16 x 3/4 inch
3 Flange nuts, 5/16 inch
Installing the Left Rear Baffle
1. Place the left rear baffle behind the left cutting
chamber (Fig. 12). The tabs will mount on the outside
of the mower.
2. Align the left rear baffle tight against and flush with
the bottom of the center baffle and against the mower
flange (Figures 12 and 13).
3. Clamp the baffle in place.
1
3
Figure 12
1. Center Baffle
2. Left rear baffle against
mower flange
3. Flush with bottom of
center baffle
4. Using the baffle as a template, mark, center punch and
drill 1/8 inch pilot holes at the 3 locations (Fig. 13).
5. Drill 11/32 inch dia. holes through the pilot holes
(Fig. 13).
6. Install the left rear baffle with 3 button head socket
bolts (5/16 x 3/4 inch) and 3 flange nuts (5/16 inch)
(Fig. 13).
4
2
5
m–6178
4. Left cutting chamber
5. Tab
Important
Make sure the bolt heads are installed on
the inside of the cutting chamber. See figure 13.
6
5
1
8
4
Figure 13
1. Left rear baffle
2. Left side of mower
3. Button head socket bolt,
5/16 x 3/4 inch
4. Flange nut, 5/16 inch
7
2
3
7
5
m–6179
5. Hole to drill
6. Rear center baffle
7. Mower flange
8. Tab
Advertisement
