Page 1
QUAD i m a g i n g p o w e r QUAD2400 GENERATOR INSTRUCTIONS BWL-0350/1 BOWENS INTERNATIONAL LIMITED 355 Old Road Clacton on Sea Essex CO15 3RH UK Tel: +44 (0)1255 422807 Fax: +44 (0)1255 436342 www.bowensinternational.com BOWENS...
Continuous or Intermittent flash-indication mode. QUADX Flash Head (BW7660) 281 x 184 x 336mm (362mm inc. handle) 9.5kg Due to our policy of constant product improvement, Bowens International reserves the right to change equipment specifications without notice. -stop increments on each channel www.bowensinternational.com...
Page 3
Symmetric/Asymmetric Heads and accessories from the QUAD range can be used with the QUAD2400 power packs. For Master Power Control details of all related products, please contact your local distributor, a list of which can be found at Independent Channel Variators www.bowensinternational.com.
Page 4
Ready Indicator Window www.bowensinternational.com QUAD2400 QUAD2400 If the unit appears to have developed a problem, first establish that it is a genuine internal problem and not a case of normal operation such as overheating. Carry out the following checks to eliminate any external causes.
AC Inlet 230VAC 50/60Hz 16A Modelling Thermal Reset Button Flash Thermal Reset Button NOTES: 1 The QUAD2400 displays the power available to each channel in watt-seconds on the two red numeric Power Level Displays marked Channel A and Channel B.
Page 6
The unit can be set to display power in terms of a decimal reading where 10.0 represents full power. This display mode can be set by holding down the test button at switch on. www.bowensinternational.com QUAD2400 QUAD2400 Test Button and Ready Indicator Light The green Test Button is lit whenever the power pack reaches 100% charge and is ready to be triggered.
Need help?
Do you have a question about the QUAD2400 and is the answer not in the manual?
Questions and answers