Related Manuals for Bowens QUAD BWL-0350/1
Summary of Contents for Bowens QUAD BWL-0350/1
- Page 1 QUAD i m a g i n g p o w e r QUAD2400 GENERATOR INSTRUCTIONS BWL-0350/1 BOWENS INTERNATIONAL LIMITED 355 Old Road Clacton on Sea Essex CO15 3RH UK Tel: +44 (0)1255 422807 Fax: +44 (0)1255 436342 www.bowensinternational.com QUAD2400...
-
Page 2: Getting Started
Continuous or Intermittent flash-indication mode. QUADX Flash Head (BW7660) 281 x 184 x 336mm (362mm inc. handle) 9.5kg Due to our policy of constant product improvement, Bowens International reserves the right to change equipment specifications without notice. Specifications <4 seconds (117V) <6 seconds (117V) - Page 3 QUAD2400 www.bowens.co.uk Dear Valued Customer, Thank you for choosing the Bowens QUAD2400 professional flash system. Number of Channels Accurate, ergonomic, powerful and simple to use, the QUAD2400 power pack was designed by Number of Head Sockets working closely with photographers to develop a flash that meets the standards demanded in professional studios today.
- Page 4 Ready Indicator Window www.bowens.co.uk If the unit appears to have developed a problem, first establish that it is a genuine internal problem and not a case of normal operation such as overheating. Carry out the following checks to eliminate any external causes.
-
Page 5: Rear Panel
Power Level be increased to Maximum and the unit left switched on for at least 30 minutes occasionally to help preserve the life of the capacitors. www.bowens.co.uk Power On/Off Switch AC Inlet 230VAC 50/60Hz 16A... - Page 6 The unit can be set to display power in terms of a decimal reading where 10.0 represents full power. This display mode can be set by holding down the test button at switch on. www.bowens.co.uk Test Button and Ready Indicator Light The green Test Button is lit whenever the power pack reaches 100% charge and is ready to be triggered.