Table of Contents
Advertisement
Safety precautions
2WA RN IN G
To prevent injury and/ or fire, take the
follow ing precautions:
• Insert the unit all the w ay until it is fully
locked in place. Otherw ise it may fly out of
place during collisions and other jolts.
• When extending the ignition, battery or
ground w ires, make sure to use automotive-
grade w ires or other w ires w ith an area of
0.75mm
2
(AWG18) or more to prevent w ire
deterioration and damage to the w ire
coating.
• To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the pow er immediately and
consult your Kenw ood dealer.
• M ake sure not to get your fingers caught
betw een the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
• Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, w ash it off
w ith soap immediately.
2CA U TION
To prevent damage to the machine,
take the follow ing precautions:
• M ake sure to ground the unit to a negative
12V DC pow er supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places w ith too much dust or the
possibility of w ater splashing.
• Do not set the removed faceplate or the
faceplate case in areas exposed to direct
sunlight, excessive heat or humidity. Also
avoid places w ith too much dust or the
possibility of w ater splashing.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate w ith your
fingers.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
• When replacing a fuse, only use a new one
w ith the prescribed rating. Using a fuse w ith
the w rong rating may cause your unit to
malfunction.
• To prevent short circuits w hen replacing a
fuse, first disconnect the w iring harness.
• Do not place any object betw een the
faceplate and the unit.
• During installation, do not use any screw s
except for the ones provided. The use of
improper screw s might result in damage to
the main unit.
— 3 —
IM PORTANT INFORM ATION
About the disc changer to be
connected:
To connect a disc changer having the "O-N"
sw itch to this unit, set the "O-N" sw itch to "N".
To connect a disc changer having no "O-N"
sw itch to this unit, the converter cord CA-
DS100 and/or sw itching adapter KCA-S210A
are required as options.
A disc changer doesn't w ork w hen it is
connected w ithout using these options.
If a model w ith no "O-N" sw itch is connected,
some unavailable functions and information
that cannot be displayed are generated.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenw ood CD changers
can be connected.
You can damage both your unit and the CD
changer if you connect them incorrectly.
Advertisement
Table of Contents
