Introduction; Before Applying Pow Er; Safety Precautions - Kenwood M-A300 Instruction Manual

Introduction

Before applying pow er

2
Units are designed for operation as follow s.
U.K. ............................................................................................ AC 230 V only
U.S.A. and Canada ................................................................ AC 120 V only
Australia .................................................................................. AC 240 V only
China ............................................................................................... 220 V only
* Other countries ............................... AC 110-120/220-240 V sw ichable
For the United Kingdom
Factory fitted moulded mains plug
1. The mains plug contains a fuse. For replacement, use only a 13-Amp
ASTA-approved (BS1362) fuse.
2. The fuse cover must be refitted w hen replacing the fuse in the
moulded plug.
3. Do not cut off the mains plug from this equipment. If the plug fitted
is not suitable for the pow er points in your home or the cable is too
short to reach a pow er point, then obtain an appropriate safety
approved extension lead or adapter, or consult your dealer.
If nonetheless the mains plug is cut off, remove the fuse and dispose
of the plug immediately, to avoid a possible shock hazard by
inadvertent connection to the mains supply.
IM PORTANT: The w ires in the mains lead are coloured in accordance
w ith the follow ing code:
Blue: Neutral
Brow n: Live
Do not connect those leads to the earth terminal of a three-pin plug.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
RISK OF ELECTRIC SHOCK
Downloaded from: http://www.usersmanualguide.com/
THIS APPLIANCE TO RAIN OR M OISTURE.
CAUTION
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYM BOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED " DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT M AY BE OF SUFFICIENT M AGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAM ATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IM PORTANT OPERATING AND M AINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOM PANYING THE APPLIANCE.
Caution : Read this section carefully to ensure safe operation.
* AC voltage selection
The AC voltage selector sw itch on the rear panel is set to the
voltage that prevails in the area to w hich the unit is shipped. Before
connecting the pow er cord to your AC outlet, make sure that the
setting position of this sw itch matches your line voltage. If not, it
must be set to your voltage in accordance w ith the follow ing
direction.
Note:
Our w arranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector sw itch.
M ove sw itch lever to match your line voltage w ith a small screw -
driver or other pointed tool.
Caution : Read this section carefully to ensure safe operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REM OVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
AC voltage selector sw itch
AC 220 -
AC 110 -
240V~
120V~
CONNECT WITH AV
CONTROL CENTER
AC 110 - AC 220 -
120V~ 240V~
SUB
FRONT SURROUND WOOFER CENTER SURROUND FRONT
UNSWITCHED
+ +
- -
R R SW (6-16Ω) (6-16Ω) C L L
SPEAKERS SPEAKERS
M -A3 0 0 / A1 0 0 (En)