DORMEO OFD-CON555-BLK Operating Instructions

DORMEO OFD-CON555-BLK Operating Instructions

Contour executive chair

Advertisement

OPERATING INSTRUCTIONS

1. To Adjust Seat Height:

While seated, lean forward and reach under the right
side of the chair to find the handle. Lift the handle
and raise your body up slightly to allow the chair to
rise to the desired height. To lower the seat, lift the
handle while applying more weight downward on the
seat. The chair will descend until the handle is
released or the chair reaches the bottom position.

2. To Operate Tilt Lockout:

Reach under the left side of the chair to find the
handle. Flip the handle down and lean back to allow
the chair to tilt backwards. Flip the handle up to lock
the chair angle while the desired position is reached.
3. To Adjust Tension on the Tilt
Mechanism:
Reach under the front center of the chair, grasp the
round knob and turn counter- clockwise to make the
tilt mechanism firmer (stiffer). To make the tilt
mechanism less firm, turn the knob clockwise until
the desired resistance is found.
4. 360° Swivel:
360° seat swivel.
Model Number: OFD-CON555-BLK / OFD-CON555-GRY
Contour Executive Chair

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OFD-CON555-BLK and is the answer not in the manual?

Questions and answers

Summary of Contents for DORMEO OFD-CON555-BLK

  • Page 1 (stiffer). To make the tilt mechanism less firm, turn the knob clockwise until the desired resistance is found. 4. 360° Swivel: 360° seat swivel. Model Number: OFD-CON555-BLK / OFD-CON555-GRY...
  • Page 2 Place the assembled chair on top of Gas Lift (3) and press down until fully engaged. Place the Plastic Caps (13) into arm holes once screws have been tightened. Periodically (every 90 days) tighten all screws in the chair. ATTENTION: Make certain all screws are fully tightened before using chair. Model Number: OFD-CON555-BLK / OFD-CON555-GRY...

This manual is also suitable for:

Ofd-con555-gry

Table of Contents