Intex 15IO Owner's Manual

READ AND FOLLOW ALL INSTRUCTIONS
BEFORE INFLATING OR USE
BEFORE INFLATING WITH BUILT-IN FOOT PUMP
• Spread the airbed out on a fl at surface. Make sure this surface is
free of stones or others sharp objects which might puncture the airbed.
• The built-in air pump infl ation valve
• Make sure that the insert plug is properly positioned and the 2 in 1
exhaust valve cap is securely tightened.
2
TO INFLATE USING THE BUILT-IN FOOT PUMP
• Remove the air pump infl ation valve cap and insert plug
cap and plug to reattach after infl ation.
• Locate and spread the built-in foot pump out to ensure the foot pump
surface is fl at and straight.
• Placing your foot directly over the infl ation valve opening, push fi rmly
down . This will push air from the air pump chamber into the bed.
3
• Release your foot so the air pump chamber will re-fi ll with air for the
4
next cycle.
• Repeat until desired fi rmness is achieved.
• Replace the air pump infl ation valve insert plug and cap
TO INFLATE USING AN EXTERNAL AIR PUMP
• Make sure the air pump infl ation valve
positioned and the 2 in 1
• Pull 2 in 1 valve cap to open.
2
• Insert the nozzle from an air pump into the 2 in 1
• Infl ate the product to approximately 80% of desired fi rmness.
CAUTION: To prevent bursting, do not over infl ate or use high
pressure air compressor.
• Close 2 in 1 valve cap securely after infl ation.
2
TO DEFLATE
• Pull out 2 in 1 valve cap.
2
• Pull infl ation valve base to release air.
CAUTION: When opening, point the exhaust valve away from any
person.
• Replace infl ation valve base and cap securely.
IMPORTANT
Air inside of bed may expand and contract with varying temperature leading
to reduce pressure inside of the bed. If this occurs, simply add more air
using the pump to achieve desired fi rmness. If puncture occurs, please refer
to instruction. Repair kit/patch is enclosed.
–––– SAVE THESE INSTRUCTIONS ––––
©2018 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/
an Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the
European Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading
B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
ENGLISH
®
INTEX OWNER'S MANUAL
BUILT-IN FOOT PUMP
must face up.
1
insert plug is properly
1
exhaust valve cap is securely tightened.
2
2
INSTRUCTION SHEET SIZE: 7.5" X 10.3" 05/17/2018
. Save the
1
.
1
infl ation valve.
15IO
1
2
3
4
2
INFLATE
DEFLATE
015-*IO-R0-1905