Menu Items; Video Setup - Sharp DV-SV80H Operation Manual

MENU ITEMS

VIDEO SETUP

TV DISPLAY:
The aspect ratio of the picture provided by the DVD player
can be varied in line with the features available on the TV
in use.
The options available are:
NORMAL / PS (4x3 Pan & Scan):
Allows you to see the movie fill the entire screen of your
TV, but not the right and left edges. This type of picture can
only be viewed, if it is contained on the disc.
NORMAL / LB (4x3 Letterbox):
Allows you to see movies in their original aspect ratio. You
will see the entire frame of the movie, but it will occupy a
smaller portion of the screen.
WIDE (Wide screen 16x9):
Choose this setting if your DVD player is connected to a
wide-screen TV.
Please Note:
Depending on the format of the DVD disc. (eg. 2.35:1) the
picture may still have black lines above and below this
picture.
Downloaded from: http://www.usersmanualguide.com/
TV TYPE:
The video standart of the DVD player output can be
selected from “MULTI” or “PAL”.
If “MULTI” is selected, the output standart will be either
NTSC or PAL depending on the DVD being played.
If “PAL” is selected, the video output will be converted to
PAL standard irrespective of disc standard.
NOTE:
When an NTSC disc is played, it is possible that some
subtitles will be distorted. If this happens please change
TV TYPE to “MULTI”.
VIDEO OUTPUT:
The Video output of the DVD player can be selected as ‘S-
VIDEO’ or ‘RGB’.
If ‘S-VIDEO’ is selected, RGB output via scart will be
disabled, only CVBS will be active via scart. ‘S-VIDEO’
output will be active via MiniDIN connector. After switching
to S-VIDEO, TV should be switched to S-VIDEO input with
TV remote control. If ‘S-VIDEO’ is selected in order to
disable RGB via scart and user prefers to watch CVBS via
scart, TV should be switched to scart input with TV remote
control.
If ‘RGB’ is selected, S-VIDEO output will be disabled. Scart
output will be CVBS+RGB. This is the factory setting of the
DVD player.
- 33 -
EN