Sharp DV-SV80H Operation Manual page 23

NOTE:
• In SETUP menu, an ‘ANGLE MARK’ option exists, which,
if enabled, will display a continuous angle mark on the
screen as long as multi-angle scene is available.
Press ANGLE during play.
The current angle is changed.
Press ANGLE a number of times until the preferred
viewing angle is selected.
NOTE:
• This function will only work on discs where different
angles have been recorded.
• The viewing angles are shown on the screen. You can
select one from them for viewing.
• If you press ANGLE outside of a multi-angle scene on a
multi-angle title, you will see that “ “ is displayed. This
means that there are total x angles on that title and the y th
angle has been selected to be played, when the multi-angle
scene starts. “ “ means that there is only one angle
currently available.
- 22 - EN
Downloaded from: http://www.usersmanualguide.com/