Hardware Configuration; Preparation; Terminal Choose And Communication Pairing - lifeSMART HVAC Gateway User Manual

LifeSmart
2.

1.Preparation

1.1 Make sure HVAC is on power, including all outdoor / indoor machines.
1.2 Make sure all functions working well without alarm or report.
1.3 Distribute network address to each indoor machine. (For all series of Daikin and Toshiba, we need to
distribute address manually. For other brandings with only 1 outdoor machine, the indoor machines are
distributed automatically)
1.4 Connect the gateway and HVAC interface as below chart guidance

2. Terminal Choose and Communication pairing

2.1 Hardware Interface and dialing plate
Function：CONFIG 1 ：Dialing terminals( RED) is interface for choosing AIR Con brandings.
Notice：Improper dialing may cause devices not working. Please consult LifeSmart Service Engineer before
making any change to dialing terminals.
CONFIG 2：Dialing terminals ( BLUE) is interface for better communication for AIR Con.
2.2 Dialing Terminals and communication terminals for different brandings.
Hardware Configuration
7 / 11