LifeSmart Product Brief Introduction Thanks for purchasing LifeSmart HVAC gateway, which can easily turned your central AC to become Smart and controller remotely. Now the gateway has already supported Daikin, Toshiba, Hitachi, Mitsubishi, Hisense, Haier , Panasonic, York , Midea, LG , BOSCH, GREE and etc.
LifeSmart Installation 1.Outlooking Size & Installation Environment Installed indoor only and installed hidden 1-1 Out looking and Dimension 2.Components (1)Display:Show the contents of communication, display the related parameter like connected HVAC brandings and Qty of indoor machines.
LifeSmart (2)LED indicator:Show status of the Gateway (3)Buttons:Functional buttons to set up parameters and page up/down functions. (4)AIR CON Terminals:For different protocol terminals. (5、6、7、8)are terminals for other bus protocol. (9)CONFIG 1 :Dialing terminals( RED) is interface for choosing AIR Con brandings.
#Better NOT put communication wire together with the power line to avoid the unexpected disturb. If there is not enough space, please grantee the communication wire distance between gateway and other wire more than 30cm. #If wrongly connect the power line with signal terminal, it will cause fuse burn , please contract LifeSmart .
2.1 Hardware Interface and dialing plate Function:CONFIG 1 :Dialing terminals( RED) is interface for choosing AIR Con brandings. Notice:Improper dialing may cause devices not working. Please consult LifeSmart Service Engineer before making any change to dialing terminals. CONFIG 2:Dialing terminals ( BLUE) is interface for better communication for AIR Con.
LifeSmart X,Y X,Y Midea Outdoor X,Y X,Y X,Y X,Y Bosch X,Y (CEN.) 3. Display and button user manual and LED Indicator Instruction 3.1 Once the gateway powered with DC 12V , it starts initialization. 3.2 The initialiaztion will continue like 20secons, and change to “ Able to reset “ status . Right now the LCD display shows “...
1.2 Please click the “add devices in APP, and choose the HVAC Gateway 1.3 Back to home page, click left corner LifeSmart – General – All devise – Smart Station – HVAC Gateway – Settings, then slide from right to left at No.1 Address, sync, and choose all groups to retrieve all indoor machines group 1.4 It will takes about 1-10 minutes at 1...
Page 11
LifeSmart grey) , then rename each AC device.