Advertisement
The Eastwood 20-Gallon Parts Washer is specifi cally designed with heavy-duty components and a quality powder coated fi nish to provide years of trouble free service. Fea-
tures include a 20-gallon capacity tub (12-gallon actual capacity), a fl exible metal "gooseneck-type outlet wand, re-useable fi lter, and a detachable
"fl ow-through" cleaning brush and hose extension.
WARNINGS
•
Do not use solvent based or fl ammable cleaning agents in this parts washer. The recirculating pump is designed to operate with water-based
cleaning agents only. Solvents will destroy the pump and could present a fi re hazard.
•
Do not use paint or powder dissolving solutions that would remove the powder coated fi nish of the Tub and components.
•
Never let parts washer run while unattended. Clogging of the fi lter and resulting overheating of the pump motor can occur.
•
Always plug into a properly grounded outlet.
•
For indoor use only.
•
Always wear chemical resistant gloves and adequate eye protection.
SPECIFICATIONS
•
120 Volt AC, 60hz current requirement.
•
Maximum pump capacity @ outlet: 1 gallon per minute.
•
20 gallon tub capacity, 12 gallon operating capacity
PARTS
A (4) Legs
B (1) Tub with attached lid
C (1) Bag of hardware
(24 screws, nuts
& lockwashers)
D (1) Storage tray
E (1) Pump box with power cord
F (1) Pump box lid
G (1) 4" x 4" x 1/4" pump inlet
fi lter media
H (1) Pump Inlet Filter Cover
I
(1) Parts tray
J (1) Small Parts Bin
K (1) Flexible, positionable metal
"Gooseneck" fl uid outlet
tube with nozzle
L (1) Flow-through Parts
Cleaning Brush and
hose extension
2
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
D
A
L
B
F
E
C
H
K
G
J
I
Advertisement
