Jazwares Fortnite Instruction Manual

CLO K T WER
INSTRUCTION MANUAL
Please save this instruction sheet, it contains important information.
CONTENTS
BASE (X4) WALL (X4)
FLOOR (X1) BALCONY (X4)
ROOF (X1) HALF WALL (X4)
Made in China
Used with permission. Manufactured and Distributed by:
Jazwares, LLC, Sunrise, FL 33326, USA
Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom
Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt, Germany
www.jazwares.com / www.jazwares.de
© 2019 Epic Games, Inc. Fortnite and its logo are registered trademarks of
Protect the environment by not disposing of this
Epic Games, Inc. in the USA (Reg. U.S. Pat. & Tm. O .) and elsewhere.
FNT0199 All rights reserved. product with household waste. Check your local
authority for recycling advice and facilities.
1
1 1
Lay pieces on a flat surface and align them.
Jack
2
Arrange the pieces so that one peg sits inside the corresponding opening.
The other side should be slightly raised.
CLOCK (X4)
LIGHT UP
ACCESSORIES
3
Place your thumb on the raised side of the tab and firmly apply pressure to snap into place.
Pull tab to activate
light up function.
2 x 1.5V LR41/AG3 FOR EACH
10 x 1.5V LR41/AG3
BATTERIES INCLUDED
(The batteries are not replaceable).
2
Tab
1
1
2
3
4
3 4
Even fit
Raised
Raised
2
4
Repeat steps 1 - 3 to create different configurations.
Peg
Tab
Jack
Socket
5
Hinge at connection points to create 3D structures.
6
To dismantle, hold pieces and twist gently to release. To prevent broken nails or minor injury, do not use
fingernails to pulls pieces apart.
TIP: Always keep at least one
side open on all 3D structures
to ensure pieces can be
removed.
3