Control Panel /Starting The Appliance /Temperature Adjustement /Temperatur Indicator / Supercool-Function 14 Switching Off Th Appliance / Superfrost Function - Novamatic EKI 1220-IB Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Control panel
A B
A -Mains operation indicator
B -ON/OFF button
C -Temperature setting button (.+.=warmer)
D -Temperature indicator
E -Temperature setting button (.-.colder)
Using
Starting the appliance
• Plug it into the socket.
• Press the EIN/AUS (B)(ON/OFF)button.The mains
operation indicator (A)lights up.
• Press one of the .+.(C)or .-.(E)buttons.The
temperature indicator goes into operation and
indicates the set nominal temperature.
If the regulator is set at a higher level,wait about 4
hours before loading the appliance.
The right temperature for loading food products to be
cooled is +5 °C.
Temperature adjustment
• By pressing one of the .+.(C)or .-.(E)buttons it is
possible to switch from the actual temperature (the
temperature indicator is lit and remains
stationary)to the nominal temperature (the
temperature indicator blinks).
• By continuing to press one of the buttons,the
nominal temperature changes 1 °C.
• If no button is pressed,the temperature indicator
automatically returns to the actual temperature
after about 5 seconds.
Temperature indicator
The temperature indicator gives a variety of
information.
• During normal operation,it shows the temperature
inside the refrigerator compartment.(actual
temperature).
• When setting the temperature,the temperature set
for the refrigerator compartment (nominal
14
ON/OFF
C
SUPERFROST SUPERCOOL
D
E F
F -SUPERFROST indicator
G -SUPERFROST button
H -SUPERCOOL indicator
I -SUPERCOOL button
temperature) at that moment blinks.
Caution:as many as 24 hours may be required
before the temperature indicator shows the actual
temperature.
SUPERCOOL function
The SUPERCOOL function speeds up the cooling of
fresh food products while at the same time protecting
those already stored from undesirable heating.A
nominal temperature of +2 °C is automatically
preset.
• The function turns on by pressing the
SUPERCOOL button (I).The yellow indicator
(H)lights up.
• It is possible to stop this function at any time by
pressing the SUPERCOOL button once again.The
yellow indicator turns off.
• If the SUPERCOOL function does not stop
manually, it is automatically cut off electronically
after about 6 hours.
The SUPERCOOL function is deactivated if the elec-
tric current is cut off!
Temperature
There are different temperature zones in the
refrigerator compartment.The warmest zone is at the
top,and the coldest zone is above the cover of the
vegetable bins.
The internal temperature is influenced by the
following factors:
•Room temperature
•How often the door is opened
•Amount of food products stored
•Appliance setting
G
H I

Advertisement

Table of Contents
loading

Table of Contents