Setting Local Area Code - Daewoo International DTC-160 User Manual

SETTING MENU
SETTING DATE AND TIME
1. In on-hook state, press [DEL] key, LCD displays SET 1 DATE
2. Press [DEL] key, the last two digits of year fl ash.
3. Press [UP] or [DOWN] key to edit the year, Press [DEL] key to confi rm, use the same method to
set the month, date, hour and minute.
Unit will save and quit after 12 seconds.

SETTING LOCAL AREA CODE

1. At on-hook state, press [DEL] key and then press [UP] key, LCD will display SET 2 CODE
2. Press [DEL] key again, LCD displays CODE - - - - -
3. Press [UP] or [DOWN] key to set the fi rst digit of local area code;
4. Press [DEL] key to confi rm and enter the second digit setting, use the same method to set the
last 4 digits.
5. Unit will save and quit after 12 seconds.
NOTE: If the local area code only 4 digits, the last digit can be left as "-".
After set the local area code, unit will auto-fi lter the area code if the incoming call number with
the fi rst several bits as same as the local area code.
SETTING PABX CODE
1. At on hook state, press [DEL] key
2. Press [UP] key twice, LCD displays SET 3 PCODE.
3. Press [DEL] to confi rm, LCD displays PCODE --
4. The fi rst "-" fl icker and indicate to set the fi rst code.
5. Press [UP] or [DOWN] key to set the fi rst code, Press [DEL] key to confi rm to enter the next
one.
NOTE:
If only one digit of PABX code, left the second digit as "-".
If set PABX code, when dialing back incoming call, and if the incoming number is more than 6
digits, unit will auto-add PABX ahead the number and pause 1 second.
SETTING AUTO IP
In on-hook state, press [DEL] key and then press [UP] key three times, LCD will display SET 4
AUTO IP.
NOTE: This function needs not to set.
SETTING PULSE/TONE DIAL MODE
1. In on-hook state, press [DEL] key and then press [UP] key four times, LCD will display SET 5
P/T
2. Press [SET] to confi rm, then press [UP] or [DOWN] key to select PULSE or TONE
3. Press [SET] to confi rm.
SETTING ANTI-DIALING FUNCTION
1. In on-hook state, press SET key and then press [UP] key 5 times, LCD displays SET 6 ALAR
2. Press SET key to confi rm, LCD displays ALAR OFF, press [UP] key to select ON or OFF.
3. Press SET key to confi rm.
ENG
13