Setting Interface - Titan TR7 User Manual

2.2.6 Setting interface

Function
Close/open
OLED screen
Select menu item
Confirmation
Show/close the initial interface
Smooth base station
1 6 www.titanposition.com
Table 2.5 Instructions for setting interface
Button operation
Double-click
Power button
Single-click
Fn
Single-click
Power button
Double-click
Power button
Single-click
Fn
Click the Fn button to select
the base station, then click the
power button to confirm
TR7 GNSS System User Manual
Contents
Click the Fn button and the selection box will
automatically jump to the next option.
Click the power button to confirm the menu content of
the current selection box and enter the lower menu.
Display current receiver operating mode, satellite
information, PDOP, and other information
In RTK mode, from left to right, it means:
Base station, static, reset, return
Enter the base station setting interface, the screen can
choose smooth acquisition, select smooth, the host
automatically smoothes the 10 point coordinates and
sets the station and transmits it with RTCM3.2 differential
message; if no smoothing is selected, the host sets the
coordinates once.