File Overwriting Mode Setting; Error Input On/Off Setting - Unipulse DS252 Operation Manual

3 Basic operation of the DS252

28 : File Overwriting Mode Setting

Set the operation to be performed when a CF card is full of data.
Setting name
Selectable items 00 : OFF (not overwritten) (initial value)
Display
Reference
Precautions

29 : Error Input ON/OFF Setting

Set whether or not to validate input data by an external terminal.
Setting name
Selectable items 00 : OFF (error input available) (initial value)
Display
Reference
48
28 : File Overwriting Mode Setting (OVERWRITE)
01 : ON (overwritten)
2 8 : O V E R W R I T E
0 0 : O F F
・If this is set to OFF (not overwritten):
When the inserted CF card does not have enough free space or the number of files
is too large, writing operation to the CF card is not performed.
Reinsert a CF card with enough free space for recording.
Recording into the internal memory will be continued.
・If this is set to ON (overwritten):
The oldest file(s) on the CF card is deleted as required for writing to record the
latest data.
・If this is set to OFF (not overwritten), write operation into the internal memory
will be continued, but if the internal memory has also become full, data
accumulation will be simply made result.
・If this is set to ON (overwritten), old file(s) will automatically be deleted.
Therefore, save important data on a PC etc. as soon as possible.
29 : Error Input ON/OFF Setting (ERROR INPUT)
01 : ON (error input unavailable)
2 9 : E R R O R I N P U T
0 0 : O F F
・If this is set to ON (error input available):
The SI/F Bch ST signal input on the rear panel terminal block is used as an error
input terminal.
Data is invalid as long as this terminal is short-circuited with the [COM] terminal
and is not reflected in the grand total data. ('E' is added in the STATE column.)
・If this is set to OFF (error input unavailable)
The SI/F Bch ST signal on the rear panel terminal block functions to process sub
totals (ST).