Page 1
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 1 Original operating instructions Hand-Held Electric Planer RT-PL Art.-Nr.: 43.452.73 I.-Nr.: 11010...
Page 2
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 2...
Page 3
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 3...
Page 4
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 4...
Page 5
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 5...
Page 6
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 6 “Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 7 Please note that our equipment has not been Important! designed for use in commercial, trade or industrial When using equipment, a few safety precautions applications. Our warranty will be voided if the must be observed to avoid injuries and damage. machine is used in commercial, trade or industrial Please read the complete operating manual with due businesses or for equivalent purposes.
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 8 Switch the appliance off when it is not in use. Alternatively you can connect the equipment to a Wear protective gloves. vacuum cleaner. To do so, insert the vacuum cleaner tube (c) into the chip ejector adapter (7). Check that all the parts are properly connected.
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 9 6.2.2 Chamfering edges (Fig. 11-12) 8. Cleaning, maintenance and ordering There are three V-shaped grooves (a) in the front of spare parts base plate that enable you to plane edges at an angle of 45° for a smooth finish. You can choose Always pull out the mains power plug before starting from three different sizes of V-shaped grooves any cleaning work.
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 10 Clean the knife seat before fitting. Install the knives 8.6 Ordering replacement parts in reverse order. Check that the planing knife Please quote the following data when ordering conforms with both ends of the planing shaft. Always replacement parts: replace both knives to ensure a uniform chip depth.
Page 11
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 11 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH. Technical changes subject to change...
Anleitung_RT_PL_82_SPK7:_ 08.04.2010 8:04 Uhr Seite 12 t GUARANTEE CERTIFICATE Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.
Need help?
Do you have a question about the RT-PL 82 and is the answer not in the manual?
Questions and answers