Snapper XD Series Owner's Manual page 56

OPERATION
STARTING AND STOPPING HEDGE TRIMMER (See Figure 3.)
The hedge trimmer has an electronic control panel with on/off button and an anti-jam function.
It also has a safety lock button and switch trigger.
1. Push the power button (I/O) (1) to turn the unit on.
2. Press the safety lock button (2) into the handle and hold.
3. Squeeze the trigger switch (3). The hedge trimmer will turn ON.
4. Release the safety lock button. The hedge trimmer will stay on as long as the trigger
switch is engaged.
5. The hedge trimmer will stop if you release the trigger handle.
IMPORTANT: If the hedge trimmer is accidentally dropped, the hedge trimmer will turn OFF and
the blade will coast to a stop after several seconds. The hedge trimmer will then be locked OFF
again.
1
2
3
11
FIG.3