Advertisement
ETP-MT/R OP SOLAR Tower Installation Instructions
III.
Installation Overview
Solar towers including the following features (see Figures 1 and 2):
• Louvers for airflow to avoid condensation on the electrical connections
• A removable aluminum Plate to mount the Solar Controller and other devices
• Weld studs behind the Emergency Phone for mounting optional cellular device
• Weld studs with nuts behind the access panel to mount the aluminum plate
• An extra large access door
• Shelf for the batteries
• Plugged antenna hole
• Clips inside the Lexan cap and extra holes in the strobe mounting plate for routing the antenna and solar power
cables
• A mast with removable cap welded to the top of the tower's Lexan cap
Phone 773.539.1100 • Fax 773.539.1241 • info@talkaphone.com • www.talkaphone.com
Talk-A-Phone, Talk-A-Lert, Scream Alert and WEBS are registered trademarks of Talk-A-Phone Co.
Copyright 2009 Talk-A-Phone Co. All rights reserved.
Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714-3804
All prices and specifications are subject to change without notice.
Page 2 of 5
Advertisement
