About This Manual; Overview; Getting Started - Technologic Systems TS-7100 Series Manual

2/11/2020
13.5 U-Boot
14 Product Notes
14.1 FCC Advisory
14.2 Limited Warranty

1 About This Manual

The TS-7100 series of products all incorporate two PCBs connected by a high density connector. One of these
PCBs contains the CPU and some basic peripherals. The second PCB is considered to be the "I/O board" which
breaks out GPIO, networking, as well as other peripherals that can vary from product to product. Every product in
the TS-7100 series uses the same CPU board and offers the same base features. All of the TS-7100 series products
will have a full product number, for example "TS-7100-Z" is the first product in this line. This manual and all TS-
7100 series product manuals will both use "TS-7100" as well as the full product number.
When the "TS-7100" name is used, this indicates that this feature is common to all products in the series. For
example, soldered down eMMC flash is soldered to the CPU board. When the full product number is used, it is
used to indicate that the feature or peripheral being discussed is available on that product, but not necessarily every
product in the TS-7100 series.
As always, if there are any questions or concerns, please reach out to Technologic Systems' support team
(https://www.embeddedarm.com/support/) .

2 Overview

The TS-7100 is a small embedded CPU module with an NXP i.MX6UL 696 MHz CPU with 512 MB DDR3 RAM.
The CPU module provides soldered down eMMC flash, non-volatile FRAM for 2 KiB of storage, dual Ethernet
PHYs, support for a 16-bit 240x360 LCD display with resistive touch, and many more.
Configuration flexibility can be achieved in the TS-7100's mated I/O board. The I/O board provides additional
peripherals, industrial rated I/O and connectors, Ethernet, CAN, UARTs, WiFi and Bluetooth, etc. to expand
functionality and interact with the real world.
The TS-7100-Z is the TS-7100 mated with the TS-7100-Z I/O board. The TS-7100-Z offers a DIN rail mountable
enclosure with LCD and touch screen display, as well as wireless connectivity and industrial I/O. Peripherals
available on the TS-7100-Z board include: soldered down WiFi with built in Bluetooth, our TS-SILO
supercapacitor technology for safe shutdown upon power loss, dual 10/100 Ethernet ports, two relays, dual USB
host ports, 30 VDC high-current low-side switch outputs or digital inputs, dedicated 30 VDC digital inputs,
dedicated high-side switch output, 0-12 V or 4-20 mA ADC inputs, with all I/O protected by a hardware over-
voltage or over-current breaker system, and a 8 V to 48 V DC input range.

3 Getting Started

https://wiki.embeddedarm.com/w/index.php?title=TS-7100&printable=yes
TS-7100 - Technologic Systems Manuals
3/44