Global Model 812410 Instruction Manual

globalindustrial.ca
Instruction Manual
Customer Service
US: 1-800-645-2986
48" LED SHOP LIGHT - DOUBLE TUBES, 40W
WARNING
Please read entire manual carefully prior to installation and use.
Failure to observe instructions could result in item damage, severe
personal injury, and/or property damage.
• Installation and servicing should be done by a licensed electrician.
• This product must be installed in accordance with the National
Electrical Code and all applicable local codes and safety standards.
• Any alteration or modification of this product is forbidden as it may
cause product malfunction, property damage, personal injury or death.
• To avoid electric shock or component damage, unplug unit before
installation or servicing.
• Be sure fixture temperature is cool enough before touching. Do not
clean or maintain the fixture while unit is energized.
• Never use the cord for carrying, pulling or unplugging the power light.
Grasp plug and pull to disconnect from outlet. Keep cord away from
heat, oil, sharp edges or moving parts.
• Never attempt to plug in or operate light with defective or damaged
wires, power cord, or power cord plug. All defective parts should be
replaced immediately by qualified personnel.
• This product is for indoor use only.
Manual de Instrucciones
Servicio de atención al Cliente
México: 01.800.681.6940
1
Distribucion Industrial Globales S DE RL DE CF
Manuel d'instruction
Service à la clientèle
Canada: 888-645-2986
Model 812410
SPECIFICATIONS
40W
Double Tube
120 Angle Beam, 5000K
4400lm, 110 lm/W
AC Input: 120-240V
Output: 72V
Product Dims: 48"L x 4.5"W x 1.8"H
50,000 Hours Rated Life
Power Coated Steel Housing
IP 20 Rated
ETL/cETL
• Keep this manual for future use.
• For additional questions or concerns, contact Global
Industrial Customer Service at 1-800-645-2986 or visit
www.globalindustrial.com.