Download Print this page

Gear4music Large 3 Tier Studio Desk Assembly Manual

Download this manual

Large 3 Tier Studio Desk by Gear4music, 8U

Assembly Guide

SWS-175

Need help?

Do you have a question about the Large 3 Tier Studio Desk and is the answer not in the manual?

Page 1 Large 3 Tier Studio Desk by Gear4music, 8U Assembly Guide SWS-175...
Page 2 SWS-175 Page 1 of 9 1. Connect the two main feet to the cross bar, using the washers and screws. (Allen Key Required) Attach the EVA pads underneat the feet if required.
Page 3 SWS-175 Page 2 of 9 2. Put the two main desk brackets on the main feet as pictured. Tighten with allen key. The height of these brackets is optional.
Page 4 SWS-175 Page 3 of 9 3. Connect the main shelf cross bracket to the main desk brackets, as shown in the above picture. Tighten the screws.
Page 5 SWS-175 Page 4 of 9 4. Attach the keyboard shelf brackets, as pictured, tighten the screws.
Page 6 SWS-175 Page 5 of 9 5. Attach the equpment rack to the top of the main feet as shown. Tighten screws.
Page 7 SWS-175 Page 6 of 9 6. Connect the top shelf bracket to the stand, as pictured.
Page 8 SWS-175 Page 7 of 9 7. Mount the keyboard shelf on the brackets and tighten the screws. A safety screw is already installed, you can remove this to allow the shelf to extend further.
Page 9 SWS-175 Page 8 of 9 8. Install the main shelf with the wooden screws. You need to pre-drill holes for the screws. Check curve of the shelf, as per picture.
Page 10 SWS-175 Page 9 of 9 9.Attach the top shelf, as per the last step, you will need to pre-drill holes. Check curve of the shelf, as per picture.

89237