Hardware Installation - Acer Smart Touch Kit II User Manual

Hardware Installation

Install the camera module:
1st installation method (Bracket 1):
Install the camera on the top of projector by using the mounting component; fix
the camera firmly to prevent it from moving wobbly. Adjust the angle of the
camera to ensure that it can be detected by the emitter (as shown in the pic
below).
2nd installation method (Bracket 2)：
Fix the camera to projector by using the matched black supporting bracket
(shown as the following image):
First, fix the camera to the black supporting bracket with the matched screw via
a screwdriver and make sure the camera should be at the right position (shown
as the following images):
4