Toshiba TCB-SC643TLE Owner's Manual page 9

Central remote controller
Control screen
You can check and change the setting contents by All, by Zone, or by Unit.
Press [ ] (Control) on the "All" screen, "Zone" screen, or "Unit" screen to display each "Control" screen.
1 2 3
ZONE-A
9
Cool
10
4 5
No.
1
The operation status is displayed. During operation,
Next
when stopped,
2
The control range currently being displayed (All, Zone or Unit (system -
6
unit address)) is displayed.
7
3
If there is an abnormality, a check code is displayed in letters and
8
numbers.
4
Displayed during preparation.
5
The Button Operation Guide (press [
screen) is displayed.
6
You can check and change the air direction. (P.18)
7
You can check and change the air volume. (P.17)
8
You can check and change the operation mode. (P.16)
9
You can check and change the temperature. (P.15)
10
The operation status icon is displayed. The Button Operation Guide is
also displayed when changing settings such as temperature.
Icon list
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
is displayed.
: Preparation for operation is in progress.
: Preparation for heating is in progress.
The temperature acquired from the indoor unit is
only displayed in Unit "Control".
Displayed when timer operation is enabled. (P.19)
Displayed when Save Mode is enabled. (P.22)
Displayed when the operation of the remote control
connected to each air conditioner is restricted.
(P.26)
Displayed when the Total Heat exchanger is
connected and Bypass is set. (P.23)
Displayed when the Total Heat exchanger is
connected and Automatic is set. (P.23)
Displayed when the Total Heat exchanger is
connected and Heat exchange is set. (P.23)
Displayed when it is time to clean the filter. (FILTER
Sign)
Displayed when an abnormality occurs.
Owner's Manual
Functions
is displayed,
] (Control) to go to the next
EN
9-